Static field route #992

What do I check for finish work: sidewall grille / register fit?

Finish Work, Punch List & CloseoutVerified starter — finish work field check

Sidewall air devices must match the wall opening, sit flat, cover the cut cleanly, and not expose a crooked duct sleeve or ugly backing.

Open in Field Rescue Open category

Field checklist

Dry-fit the grille before final screws.
Check level and reveal around all sides.
Use correct anchors/backing if wall material requires it.
Do not over-tighten and bow the frame.
Clean face and wall after install.

Ask foreman

The wall opening/backing is rough and the grille will not sit clean. Do you want the opening corrected before I install it?

Do not

Stop if the wall is finished and the grille will not cover the opening, has no backing, or conflicts with architectural elevation/details.

Why it matters

Finish work is where rough-in becomes visible, inspected, balanced, serviced, and turned over. Clean install and access matter.

Search words: ['sidewall grille', 'wall register', 'wall opening', 'louver', 'screws', 'frame', 'finish work', 'punch list', 'closeout', 'air device'] sidewall grille wall register wall opening louver screws frame Sidewall Grille / Register Fit Air Devices 2nd year / install blue