What do I check for finish work: punch list walk: what sheet metal should check?
A punch list walk is the final sweep for visible defects, missing pieces, access issues, labels, damaged finishes, loose devices, dirty faces, and incomplete coordination.
Stop if the punch item involves rated assemblies, fire/smoke dampers, structural anchoring, electrical controls, or major reroutes - escalate instead of patching blind.
Check
Check every grille/diffuser/register is present, straight, clean, and secure.
Verify access panels/labels are installed where needed.
Look for dirty tiles, missing screws, bent faces, open seams, and damaged insulation.
Confirm dampers/air devices are accessible for TAB/owner.
Photo each issue with room number and direction.
Steps
Check every grille/diffuser/register is present, straight, clean, and secure.
Verify access panels/labels are installed where needed.
Look for dirty tiles, missing screws, bent faces, open seams, and damaged insulation.
Confirm dampers/air devices are accessible for TAB/owner.
Photo each issue with room number and direction.
Say this to your foreman
Do you want this punch list grouped by room, system, or trade-responsibility before I turn in photos?