What do I check for finish work: cutting ceiling tile for air devices?

A ceiling tile cut is visible forever. The cut should be measured, supported, clean, and matched to the correct frame type.

Stop if

• Do you want me cutting these tiles now, or are we waiting for final ceiling/layout approval before finish install?

Watch out

• Stop if the tile location is not verified, the device/frame type is unknown, or the area is protected/finished and you do not have dust-control direction.

Check

• Mark the cutout lightly and square.
• Support the tile while cutting so it does not break at the corner.
• Use the correct blade/tool for the tile type.
• Make corners clean - no wild overcuts.
• Vacuum/wipe dust and reinstall the tile without dirty fingerprints.

Steps

• Mark the cutout lightly and square.
• Support the tile while cutting so it does not break at the corner.
• Use the correct blade/tool for the tile type.
• Make corners clean - no wild overcuts.
• Vacuum/wipe dust and reinstall the tile without dirty fingerprints.

More in QA/QC, Punchlist, Documentation & Turnover