Strut Cantilever Overhang Safety

This strut has a cantilevered overhang. Do we need another rod/support or shorter overhang before loading it?

I'm checking strut cantilever overhang safety at [location]. I found: Duct/hardware is supported past the last rod with too much cantilevered strut.. This strut has a cantilevered overhang. Do we need another rod/support or shorter overhang before loading it?

Hangers, Supports, Rods & Trapeze 2nd Year RED

Stop if

Hold point on strut cantilever overhang safety: I have the location, photo, drawing/detail/spec/submittal, and what I checked. Who should verify before this gets covered, tested, started, labeled, rerouted, or turned over?

Watch out

Do not hang load off a long unsupported strut tail without verifying the detail.

Check

room/grid/area
photo of condition
current drawing/detail/spec/submittal
what I already checked
what decision is needed

Say this to your foreman

14727 strut cantilever overhang safety hangers, supports, anchors & fasteners red 2 this strut has a cantilevered overhang. do we need another rod/support or shorter overhang before loading it? strut overhang, cantilever strut, unistrut tail, trapeze overhang duct/hardware is supported past the last rod with too much cantilevered strut.

More in Hangers, Supports, Rods & Trapeze