Reading Structural Drawings for Beam Conflicts

Confirm no beam conflict at elevation [X]. If conflict, approved routing or RFI?

I'm checking reading structural drawings for beam conflicts at [location]. I found structural plan showing beams, columns, deck with dimensions and elevations. Confirm no beam conflict at elevation [X]. If conflict, approved routing or RFI?

Coordination, Clashes, Sequencing & Rework 1st Year YELLOW

Stop if

Hold point on reading structural drawings for beam conflicts: I have the location, photo, drawing/detail, and what was checked. Who should verify before this gets cut, covered, lifted, sealed, energized, or signed off?

Watch out

Don't route without checking structural drawings. Don't drill or notch beams without engineer approval. Don't assume HVAC plan accounts for all structure.

Check

room/grid/area
photo of condition
drawing/detail
manufacturer/model if visible
what I already checked

Say this to your foreman

14340 reading structural drawings for beam conflicts print reading, rfis & trade coordination yellow confirm no beam conflict at elevation [x]. if conflict, approved routing or rfi? beam conflict duct, structural drawing hvac, beam in duct path structural drawing, structural plan, beam schedule, reflected ceiling plan, rcp beam drawing, steel drawing, structure plan, beam location

More in Coordination, Clashes, Sequencing & Rework