The exterior jacket is punctured where it bears on the support, and the insulation is compressed. I checked the adjacent supports. Do you want the support interface corrected before the approved jacket repair?
Watch out
Do not cover the hole with ordinary foil tape while leaving the sharp contact in place.
Check
Inspect the jacket above, below, and around the support.
Check for wet insulation, sharp edges, compression, and movement.
Verify saddles, standoffs, boots, or isolation pieces shown in the detail.
Confirm the approved patch and seal sequence.
Steps
Inspect the jacket above, below, and around the support.
Check for wet insulation, sharp edges, compression, and movement.
Verify saddles, standoffs, boots, or isolation pieces shown in the detail.
Confirm the approved patch and seal sequence.
Say this to your foreman
The exterior jacket is punctured where it bears on the support, and the insulation is compressed. I checked the adjacent supports. Do you want the support interface corrected before the approved jacket repair?