A round reducer blows off under airflow

A reducer that separates was not mechanically engaged and sealed for the load. Re-seat, fasten, and seal it by the approved pressure-class detail.

Sealing, Leakage, Mastic & Pressure Testing 2nd Year YELLOW

Watch out

Do not rely on foil tape as the only thing holding a round reducer in place.

Check

Shut down/secure the separated fitting before repair.
Check collar depth and pipe overlap.
Inspect screw holes for stripping or tear-out.
Refasten per approved pressure class.
Leak-test or startup-check after sealing.

Steps

Shut down/secure the separated fitting before repair.
Check collar depth and pipe overlap.
Inspect screw holes for stripping or tear-out.
Refasten per approved pressure class.
Leak-test or startup-check after sealing.

Say this to your foreman

The round reducer at [location] separated under airflow. I checked overlap and stripped holes. Do you want it re-seated with approved mechanical fastening and pressure-rated seal?

More in Sealing, Leakage, Mastic & Pressure Testing