Corrosion-Resistant Systems · Supports, Hangers & Isolation
Install insulation shield at corrosive-area support
Insulated stainless/aluminum duct — Pool or wastewater
Hardware guidanceUse compatible bands/bolts and non-absorptive isolation.
Anti-seize / gallingKeep anti-seize away from insulation and vapor seals.
How to install it
- 1
Install compatible rigid shield/saddle
- 2
maintain vapor barrier
- 3
seal penetrations
- 4
prevent wet insulation at support.
Quality check
- Insulation remains dry and uncompressed.
Stop and verify
Stop if wet insulation or jacket damage is found.