Corrosion-Resistant Systems · Stainless Fabrication & Handling
Remove protective film at the correct stage
Film-protected stainless — Exposed stainless duct
Hardware guidanceUse non-marring tools and clean gloves.
Anti-seize / gallingKeep anti-seize off film edges and adhesive.
How to install it
- 1
Leave film during handling when permitted
- 2
remove it before heat-producing work and before it becomes baked or weathered
- 3
inspect surface immediately.
Quality check
- Film removes cleanly with no residue or heat damage.
Stop and verify
Stop if film has fused to the surface.