Corrosion-Resistant Systems · Stainless Fabrication & Handling
Drill stainless for 3/8-inch hardware
Stainless steel — Flanged or bracket connection
Hardware guidanceInstall approved 3/8-inch stainless bolt, flat washer, and nut arrangement.
Anti-seize / gallingApply approved anti-seize sparingly to clean threads before assembly when specified.
How to install it
- 1
Mark and center-punch lightly
- 2
use sharp stainless-rated tooling, controlled speed, cutting fluid approved for the site, and firm feed to avoid work hardening.
Quality check
- Hole is round, deburred, correctly located, and does not tear the flange.
Stop and verify
Stop if the bit work-hardens the hole or the flange cracks.