Corrosion-Resistant Systems · Anti-Seize & Galling Control
Do not reuse dirty anti-seize
Anti-seize compound — Any corrosive installation
Hardware guidanceKeep separate applicators for stainless and aluminum work.
Anti-seize / gallingContaminated compound can introduce corrosion and thread damage.
How to install it
- 1
Discard compound contaminated with steel chips, dirt, gasket fibers, or mixed products
- 2
clean applicator
- 3
use fresh material.
Quality check
- Compound is clean and traceable.
Stop and verify
Stop if the container identity or contamination history is unknown.