Corrosion-Resistant Systems · 3/8-Inch Stainless Hardware
Use hardened or load-spreading washer where specified
Approved stainless washer — Support or thin flange
Hardware guidanceDo not substitute ordinary thin washers for engineered load-spreading components.
Anti-seize / gallingApply anti-seize to threads, not bearing faces unless the procedure accounts for it.
How to install it
- 1
Confirm drawing requirement
- 2
install correct washer under nut/head
- 3
ensure full bearing surface
- 4
tighten evenly.
Quality check
- No washer embedment or local flange tearing.
Stop and verify
Stop if washer specification is unclear.